This is the website for the idea spreading. Our commercial website
will be built in www.wynnbear.us shortly afterwards.
We created a living EEMs basic element of the human basic system. With the living EEMs basic elements, we created a next-generation advanced living and sustainable human underlying and fundamental systems. We developed the modular High Volume Manufacturing (HVM) with low cost for the living EEMs basic element, which Paving the way for large-scale deployment and application to all humans on Earth.
We have built a novel EEM indoor forest system, which had been accepted
by IBPC 2021, International Association of Building Physics, Denmark (two submissions had been accepted),
Healthy Buildings conference 2021–Europe (ISIAQ), Norway (three submissions had been accepted)
Ventilation-2021, ASHRAE (American Society of Heating Refrigerating and Airconditioning Engineer) (three submissions had been accepted, in which two submissions are concerned with the EEM indoor forest system )
Mold, which is used to mould raw material due to its special shape, is a piece of the important equipment in the process of producing industrial products for low-cost mass manufacturing. In the career the founder had a period of time was in mold manufacturing companies and provide Die & mould for the customers in the United States and the United Kingdom, etc. We have strong practical experience and background in the mould field. We have also provided mould design and products for USA company of Ingersoll Rand and British Baiman at some time in the past.
The EEMs living underlying and fundamental EEMs system is with the general interest in almost all the human living & ecological system, civil engineering and infrastructure, in which the basics, underlying and fundamental systems of zero energy, zero-water-consumption, and zero-carbon with a 100% greening rate and 100% clean energy, high-quality air, and powerful carbon capture system with significant positive spillovers for global carbon removal and carbon balance, and climate challenges, have the incalculable social and economic benefits in the present and future.
Even though there are too many top companies that have entered the electric vehicle manufacturing field, one of Tesla's strength will be Die & mould soon. The quantity advantage of terminals is a real advantage in the age of big data collection, storage and centralized processing. It's hard for other people to realize that unless you have a deep and single-eyed industrial background and be a hardheaded forward-thinker and the down-to-earth technology foresight as well. The Rise of Apple, in some way, is the same thing. In other words, a single advantage is hardly a real advantage even if it's a huge improvement in this age.
[Additional words, by contrast, the autonomous driving and hardware and software systems are easy to catch up with or transplant in cutting-edge-tech countries, but some basic & underlying industrial technologies which are time-consuming and laborious, and low-cost manpower and inexpensive material resources are also indispensable, and constant maintenance and never-ending technical assistance and support, and the Die & mould is that the more you use it the worse it gets, and so on, are the weakness and the troubles without end for the company in highly developed countries with high manpower costs. Something both needs a lot of high technology and enormous low technological manpower and cheap material resources for industrial competitiveness is an inescapable obstacle, not to mention the complex industrial chain of mold industry. This is not just a problem for individuals, companies and industry, but become a part of the national difficulties. It's a joke to build a whole electric vehicle by the foundry. Which foundry will put in such large molds for cars? This is not the small tools and moulds that Foxconn puts into the phones. TSMC can supply products to multiple manufacturers using the same IP or processes since this has nothing to do with the appearance of the terminal. It's hard to imagine that electric vehicles all over the world are the same visual aspect if there is a general foundry. It is also economically impossible since the life of the die-casting mould is very short, and the punching die has no potential advantages for future electric vehicles. There are also many specialized mold factories in the world. The mould is easy to lose of accuracy or become broken, and so on.
In a word, do not naively think that the whole electric car can do OEM unless you only want to survive, not thrive. The complexity of large molds running through every step and related people is a huge barrier to upgrade and OEM. Overall, you don't know what it's like if you haven't experienced it. The mold problem is always a major problem for the car-building problem. It's not necessarily the heart of the technology, but it's certainly the heart of the problem. In other words, whether electric or conventional in the automotive world the competition in manufacturing technology will ultimately be the deciding factor.
It is indisputable that the race for advanced electric vehicles will be soon a competition for terminal numbers. Ultimately, the biggest determinant and the difficulty is the Die & Mould.
We'll repeat it here. Other technologies can be developed, transplanted, or purchased if you are willing to spend money, and there are too many vendors who want to sell to you. The manufacturing technologies, however, is often an integration of specific people and things and be hidden in factories -- In other words, you can't buy them even if you want to do that. America has learned from the past in this field but it would be a shame to repeat the same lesson a second time, especially in the age of big data. Any manufacturing technology with Volume Manufacturing (HVM) that is hidden in the factory is for the same reason, no matter the manufacturing technologies of information industry, chips, aerospace, bioengineering and new materials field, etc. It's a bit like the war on terror. When the planes, cannon and tank have done their thing, the rest is still the soldier compete or fight. No doubt there will be those who scoff at these ideas. Let them laugh first.
We are going to digress. We will delete this paragraph soon.]
The Die & Mould is extremely important in the product manufacturing process of our living human EEMs basic, underlying, and fundamental systems for High Volume Manufacturing (HVM) with low cost and Large-scale promotion and application all over the world, which is the key to get enough terminals and get enough big data. The types of all the EEMs modules contain patch EEMs, patch EEMs with solar cells, general EEMs, general EEMs with solar cells, light-duty EEMs, light-duty EEMs with solar cells, heavy-duty EEMs, heavy-duty EEMs with solar cells, extreme heavy-duty EEMs, and the EEMs is with the tanks and various sensors, components, devices, and the functional subsystems. The shape and strength of the EEMs include super hard, super soft, and moderate, flat, curved, and free-form surfaces, and so on. The Materials and components of the EEMs include 1) metallic and non-metallic inorganic material; 2) Plant materials, synthetic polymer materials, plastics, rubber, fiberglass, coatings, and adhesives of organic materials; and 3) asphalt concrete and polymer concrete of composite materials and ceramic material, etc. The main criterion for material selection is to meet the usability and the requirements of the molding process, equipment and mold design as well. After the above comprehensive and careful consideration, they are enough to apply to all aspects of the people in the living EEMs basic, underlying and fundamental systems and create a big database great enough for healthy life and longevity.
We are always bold and cautious. Here’s a quote a fashionable phrase that we have a dream that our ultimate goal is to create the advanced living EEMs human basic, underlying and fundamental systems with "Built to Last," including almost all food, clothing, housing, shelter, travel, and transportation (in which, food is under development), civil engineering (and some military engineering), basic facilities, infrastructure, in which a safe, environment beautification and protection, high efficiency, energy saving, emission reduction, healthy and high-quality-air living EEMs system for life, work, study, travel, and environment for all people living on the earth. And further, we will integrate more active concepts and smart technology to form a high-level advanced human basic, underlying, fundamental, living and ecological system with the anthropic sustainable basics for the contemporary and the next generation.
We will always study and improve functions and uses of the living EEMs system, and all the EEMs modules, various sensors and components and devices in the modules and the functional subsystems in the living underlying and fundamental EEMs system will be networked completely, which is aiming to create a lifetime recorded and incomparable personalized and healthy living human system.
The EEMs living underlying and fundamental EEMs system has a general interest in almost all the human living & ecological system, civil engineering and infrastructure and had been widely accepted in many Top & Professional Conferences in many specialized fields, contains:
ASCE (American Society of Civil Engineers), A series of Conferences, 2021, America (many had been accepted),
SAE 2021 AeroTech® Digital Summit ( Society of Automotive Engineers ), America (one had been accepted),
2021, annual conference of Canadian Society of Civil Engineering, Canada (three had been accepted),
IABSE Congress Ghent 2021, Belgium (two had been accepted),
IBPC 2021, International Association of Building Physics, Denmark (two had been accepted),
International Water Association (IWA), 2021 Latvia (one had been accepted ),
Healthy Buildings conference 2021–Europe (ISIAQ), Norway (three had been accepted),
Fib Lisbon Symposium, 2021 (International Federation for Structural Concrete), Portugal (two had been accepted),
Ventilation-2021, ASHRAE (American Society of Heating Refrigerating and Airconditioning Engineer), Canada (three had been accepted),
PhD Doctoral Workshop at ARCC ( Architectural Research Centers Consortium ) 2021: Performative Environments, America (one had been accepted),
Healthy Buildings conference 2021–America (ISIAQ), America (in processing),
The 50th Annual National Solar Conference, 2021 (American Solar Energy Society), America (in processing),
2021 AIAA Propulsion and Energy Forum and Exposition (American Institute of Aeronautics and Astronautics), America (in processing),
and ongoing.
In the global pandemic of the COVID-19 , one of the important things is the reduction of bacteria, viruses, and particulate matter and indoor microbiome, bioaerosol-related problems, background fungal ecology, and indoor ecosystem. That's what we're doing right now. We use novel advanced technologies and dual air filtration to solve these problems. Some of the initial presentations that are already online are as follow:
http://2020.botanyconference.org/engine/search/index.php?func=detail&aid=460
http://2020.botanyconference.org/engine/search/index.php?func=detail&aid=462
https://www.sae.org/publications/technical-papers/content/2021-01-0046/ ( Please wait until the Video URL is being assigned )
The initial minute supporting Video URL:
https://www.dropbox.com/s/8tgqp1uwhnmgf24/About%20Wynnbear.mp4?dl=0 (in Dropbox)
https://www.dropbox.com/s/jm69vq9kky1ygu0/About%20WYNNBEAR%20Innovation.mp4?dl=0 (back-up)
https://www.sae.org/attend/aerotech/program ( Please wait until the Video URL is being assigned )
What is the EEM indoor forest system?
A good Indoor Environmental Quality(IEQ) and real healthy air in complex places and sites should like a steak cooked by a cooking master. It must be good in color, smell, and taste rather than a piece of tasteless and dry meat, even though there's no difference in their nutritional content. Delicious food can whet our appetites, and, as a result, make us become strong to prevent some diseases. Undoubtedly, the air goes even farther than food. What is more, you "eat air” 24 hours a day without a break instead of a regular meal. High-quality air is not just a simple physicochemical indicator. It should be included necessary elements at least are as follows:
1), It should be sensually perfect in color, smell and taste. This is the minimum requirement.
2), It must be scientific and advanced in the proportion of "nutrition."
For example, the greenhouse effects and global warming have increased the concentration of carbon dioxide in the atmosphere, and mucous membrane and lower respiratory-related symptoms in relation to carbon dioxide concentrations is an inevitable issue for all people.
and 3), It must contain sufficient enough health factors in terms of "nutritional ingredient." High-quality foods are not only enough protein, fat, and starch. It also needs the corresponding vitamins and minerals, etc. There is no doubt that High-quality air is needed more, especially in the modern age of pollution.
“Reconstructed temperature records for the last 420 million years indicate that atmospheric CO2 concentrations peaked at ~2000 ppm during the Devonian (∼400 Myrs ago) period, and again in the Triassic (220–200 Myrs ago) period. Global annual mean CO2 concentration has increased by more than 45% since the start of the Industrial Revolution, from 280 ppm during the 10,000 years up to the mid-18th century to 415 ppm as of May 2019.” . With further investigation and research, the health effects and damage by the high-concentration CO2 and low-quality air are sure to become more disastrous."
The good IEQ and real Healthy air are more needed to be refreshing to the heart and pleasing to the eye, and the smell is comfortable. For now, at least, only our advanced technologies, living EEMs system, and solutions combine with the appropriate beautiful plants and flowers with plentiful oxygen, plant anions, floral, phytoncide, active constituents, fragrant scents with very low concentrations of carbon dioxide can satisfy such good wishes and goals.
